Kicker KX200.4 Bedienungsanleitung PDF herunterladen (Seite 4)

When selecting a location to mount your Kicker

amplifier be sure it is structurally sound and that

there are no items behind the area that could be

damaged by the screws. Check for wiring, brake

lines, fuel lines, gas tanks, etc.

All amplifiers generate heat under normal opera-

tion. Be sure to choose a location that allows ade-

quate ventilation for the amplifier. Also consider that

the air temperature inside an automobile’s trunk can

reach upwards of 140 degrees fahrenheit. An ampli-

fier mounted here may require additional cooling

needs such as fans or venting to allow cool opera-

tion. If possible, mounting the amp in the passenger

compartment will allow cooler operation.

Remember that the controls of the amp will need

to be accessible for adjustment later. Keep this in

mind as you choose your amplifier’s mounting loca-

tion.

Now that you are ready to mount your amplifier, use the supplied 3mm allen wrench to remove the amplifier

shroud. This will give you access to the mounting holes in the amplifier and all wiring connections.

Mounting Instructions

Remove

With the shroud removed, you now have access to the four mounting holes in the mounting feet and all wiring

connections. Drill 4 holes using a 7/64” drill bit and use the supplied #8 screws to mount the amplifier.

KX100.2 & KX200.4 Technical Manual

Version 2.0

Page 4

1 2 3 4 5 6 7 8 9 ... 19 20

Keine Kommentare

Kicker KX200.4 Bedienungsanleitung Seite 4