Kicker L7-Series Bedienungshandbuch PDF herunterladen (Seite 8)

Solobaric L7 Subwoofers

Installation

Panel dimensions for minimum recommended enclosures:

Model Volume (cu.ft.) Panel A Panel B Panel C

S8L7 0.33 10” x 10” 10” x 8” 8” x 8.5”

S10L7 0.66 12” x 12” 12” x 10.5” 10.5” x 10.5”

S12L7 0.88 13” x 13” 13” x 11.5” 11.5” x 11.5”

S15L7 1.5 16.5” x 16.5” 16.5” x 11.5” 15” x 11.5”

1 inch = 2.54cm

1 inch = 25.4mm

1cu.ft. = 28.32l

NOTE: All sealed boxes should be 50% filled with loose polyfil. Allow about two weeks break-in time for the Solo-Barics to reach opti-

mum low bass performance.

Solo-Baric L7-Series Ported/Vented Enclosure Applications

Ported Solo-Barics? Absolutely ... and with a vengeance! These enclosures incorporate massive slot loaded ports with ultra low air

velocity for ground pounding street bass that will make your hair stand on its ends (if you have any left)! These are the type of boxes

that are the "enclosure of choice" for outrageous street bass and high performance SPL contests.

The following chart shows three recommended ported enclosures for each Solo-Baric driver.

Compact has increased bass efficiency over a sealed enclosure, yet can still fit in tighter applications. It is the smallest design that

will work well for each woofer. Although it is the smallest ported enclosure, the output from 30 to 80 Hz will be

considerably higher than that of a sealed box. The two other ported designs have proportionately more output in this region.

Street Bass is a medium sized enclosure that will kick out bass that can be heard for blocks away. And it does go LOW!

SPL / Deep Bass is a large enclosure with high efficiency that will deliver the output needed to win SPL contests AND produce bass

output all the way down to the basement. We’re talking truly awesome!

If space is not at a premium and you want to get the most from your Solo-Baric L7, try one of these designs. You won’t be

disappointed.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Kicker L7-Series Bedienungshandbuch Seite 8